Wingfield Loader Bucket Forks - These high quality loader bucket forks are an excellent attachment for any bucket. Unlike most forks that attach with a set screw that puts all the weight on the bottom of the bucket, we use a high-test chain that wraps around the entire bucket which distributes the weight evenly and keeps the forks from moving side to side. Just tighten them down with a set of load binders (not included) and you are able to move pallets, equipment, brush, and more!

The Wingfield Bucket-Forks are made of 1/4" (WBF300) and 3/16" (WBF750) tubing which is reinforced with steel inserts. These inserts insure the tubing will not collapse, however can be bent when exceeding the maximum capacity. We opted to use chain that wraps around the entire bucket and a load binder is used to secure the forks to the bucket. By wrapping the chain around the bucket, it evenly distributes the weight over the entire bucket instead of all the weight falling on the bucket lip. The chain tightened by the load binders also prevents the forks from moving side to side.

750 Lbs. Capacity
60" Overall Length
42" Usable Length
1 1/2" x 3" x 3/16" Reinforced Tubing
1/4" High Test Chain
Binders not included

3000 Lbs. Capacity
80" Overall Length
56" Usable Length
2" x 4" x 1/4" Reinforced Tubing
5/16" High Test Chain
Binders not included

Order #	Weight	List Price
WBF750	90# (pair)	$275.00

Order #	Weight	List Price
WBF3000	200# (pair)	$495.00